![]() |
The MicroSYNTH Labstation is the most advanced system available for microwave-enhanced chemical reactions. Its multimode cavity, innovative reactor vessels, and sophisticated sensors and process control software easkly integrate into the way you do your chemistry. Whether your approach to synthesis is combinatorial, parallel, batch, or flow-through, Milestone's microwave technology will allow you to perform more reactions in less time and/or with higher yields than conventional methods. (You can click to see technical details of the MicroSYNTH system.)
Several different configurations exist for the MicroSYNTH labstation. It can be configured for combinatorial chemistry, parallel synthesis, or scale-up. You can contact us with questions about your specific needs. Also, check out the accessories available to adapt the MicroSYNTH for the different phases of the synthetic process.
The MicroSYNTH is designed specifically for the demands of laboratory work. Although many early papers reported reactions performed in a modified kitchen appliance, modern chemistry requires sophisticated laboratory instruments. Issues of performance, reaction control, and operator safety must be effectively addressed for microwave technology to receive acceptance in the very industries where it can have the most impact, including drug discovery, materials research, flavors and fragrances, polymers, and fine chemicals.
Our patented premixing and mode stirrer design creates uniform energy distribution throughout our large multimode cavity. This results in homogeneous reaction conditions, regardless of sample volume or multiplicity.
Milestone offers a comprehensive line of reaction vessels. From microliters to hundreds of liters, from microwell plates, glass, quartz, or Teflon closed vessels, open reflux or closed high-pressure reactors to specifically designed scale up systems, there is a Milestone reactor that will accommodate your specific chemistry.
Advanced sensor technologies in the MicroSYNTH Labstation provide accurate, dynamic reaction parameter measurements for exacting reproducibility.
Draw your desired temperature profile on our graphic display, and with the click of a mouse, our advanced Windows-based software will dynamically adjust the microwave power to deliver only what is needed to process the reaction according to your predefined profile. If you need to, you can even change parameters in the middle of a reaction.
Our variable speed magnetic stirring module is a complete stirring system, not just a series of fixed magnets. The independently rotated magnet produces consistent stirring of solutions in all vessels, independent of their positions within the cavity.
With Milestone technology, there is no need to change your existing solvent chemistry to polar mixtures. Milestone's unique WeflonTM (carbon-loaded fluoropolymer) materials directly absorb microwaves, and transfer that heat to the contents of the reactor. Thus, Weflon-coated stir bars, buttons, or reactor components become heating elements, allowing you to effectively heat microwave-transparent solvents without adding polar co-solvents.
Since microwaves heat the compounds directly, researchers can reduce or eliminate solvents, or even reduce the (Pd) catalyst. Some users have successfully replaced their solvents with water. [You can browse our library of synthesis articles for more information on this topic.]
Synthesis: Continue to fundamentals, technical details, resource library, or accessories.
General: Go to the Milestone front page, or send us an inquiry.



