FlowSYNTH & BatchSYNTH:
Technical Specs
| FlowSYNTH | |
|---|---|
| Reactor volume | 200 mL |
| Material | Reactor: PTFE-TFM Cooler: Stainless Steel |
| Material design pressure | 50 bar (725 psi) |
| Working pressure | Up to 30 bar (435 psi) |
| Working temperature | Up to 200°C |
| Flow rate | Up to 130 mL/minute |
| Reaction time | 120 seconds to 16 minutes |
| Productivity | 0.8 to 8 liters/hour |
| Return to view FlowSYNTH details | |
| BatchSYNTH | |
|---|---|
| Reactor volume | 300 mL |
| Reactor working volume (with cold finger) | 250 mL |
| Maximum operating temperature | 230°C |
| Temperature control | K-type thermocouple |
| Maximum operating pressure | 30 bar (435 psi) |
| Pressure control | Pressure transducer |
| Cooling | Internal cooling finger (vapor phase) |
| Mixing | Built-in magnetic stirring |
| Safety features |
All stainless steel cavity 4 safety interlocks on door opening Rupture disk on reactor cover Software protection for temperature setting |
| Pressure vessel |
TFM liner with 300 mL volume Fiberglass reinforced HTC safety shield TFM bottom sealing with double O-ring |
| Reactor cover |
TFM top sealing with double O-ring Stainless steel cooling finger (vapor phase) Stainless steel thermowell Stainless steel flange |
| Stainless steel flange |
K-type thermocouple Pressure transducer Inlet/Outlet ports for purging atmosphere and adding reagents Rupture disk Cooling finger inlet/outlet |
| Return to view BatchSYNTH details | |
Return to Synthesis overview.
Or, go to the Milestone front page, or send us an inquiry.